TurnBasedStrategyCourse/Library/PackageCache/com.unity.render-pipelines.core@16.0.2/Runtime/RenderGraph/IRenderGraphBuilder.cs

using System;
using System.Collections.Generic;
using UnityEngine.Rendering;

namespace UnityEngine.Experimental.Rendering.RenderGraphModule
{
    /// <summary>
    /// Common base interface for the different render graph builders. These functions are supported on all builders.
    /// </summary>
    public interface IBaseRenderGraphBuilder : IDisposable
    {

        /// <summary>
        /// Express the operations the rendergraph pass will do on a resource.
        /// </summary>
        [Flags]
        public enum AccessFlags
        {
            ///<summary>The pass does not access the resource at all. Calling Use* functions with none has no effect.</summary>
            None = 0,
            ///<summary>This pass will read data the resource. Data in the resource should never be written unless one of the write flags is also present. Writing to a read-only resource may lead to undefined results, significant performance penaties, and GPU crashes.</summary>
            Read = 1 << 0,

            ///<summary>This pass will at least write some data to the resource. Data in the resource should never be read unless one of the read flags is also present. Reading from a write-only resource may lead to undefined results, significant performance penaties, and GPU crashes.</summary>
            Write = 1 << 1,

            ///<summary>Previous data in the resource is not preserved. The resource will contain undefined data at the beginning of the pass.</summary>
            Discard = 1 << 2,

            ///<summary>All data in the resource will be written by this pass. Data in the resource should never be read.</summary>
            WriteAll = Write | Discard,

            /// <summary>Allow auto "Grabbing" a framebuffer to a texture at the beginning of the pass. Normally UseTexture(Read) in combination with UseFrameBuffer(x) is not allowed as the texture reads would not nececarily show
            /// modifications to the frame buffer. By passing this flag you indicate to the Graph it's ok to grab the frame buffer once at the beginning of the
            /// pass and then use that as the  input texture. Depending on usage flags this may cause a new temporary buffer+buffer copy to be generated. This is mainly
            /// useful in complex cases were you are unsure the handles are coming from and they may sometimes refer to the same resource. Say you want to do
            /// distortion on the frame buffer but then also blend the distortion results over it. UseTexture(myBuff, Read  | Grab) USeFrameBuffer(myBuff, ReadWrite) to achieve this
            /// if you have similar code  UseTexture(myBuff1, Read  | Grab) USeFrameBuffer(myBuff2, ReadWrite) where depending on the active passes myBuff1 may be different from myBuff@
            /// the graph will always take the optimal path, not copying to a temp copy if they are in fact different, and auto-allocating a temp copy if they are.</summary>
            AllowGrab = 1 << 3,

            ///<summary> Shortcut for Read | AllowGrab</summary>
            GrabRead = Read | AllowGrab,

            ///<summary> Shortcut for Read | Write</summary>
            ReadWrite = Read | Write
        }

        /// <summary>
        /// Declare that this pass uses the input texture.
        /// </summary>
        /// <param name="input">The texture resource to use during the pass.</param>
        /// <param name="flags">A combination of flags indicating how the resource will be used during the pass. Default value is set to AccessFlag.Read </param>
        /// <returns>A explicitly versioned handle representing the latest version of the pased in texture.
        /// Note that except for special cases where you want to refer to a specific version return value is generally discarded.</returns>
        public TextureHandle UseTexture(in TextureHandle input, AccessFlags flags = AccessFlags.Read);

        /// <summary>
        /// Declare that this pass uses the input compute buffer.
        /// </summary>
        /// <param name="input">The compute buffer resource to use during the pass.</param>
        /// <param name="flags">A combination of flags indicating how the resource will be used during the pass. Default value is set to AccessFlag.Read </param>
        /// <returns>A explicitly versioned handle representing the latest version of the pased in texture.
        /// Note that except for special cases where you want to refer to a specific version return value is generally discarded.</returns>
        public BufferHandle UseBuffer(in BufferHandle input, AccessFlags flags = AccessFlags.Read);

        /// <summary>
        /// Create a new Render Graph Texture resource.
        /// This texture will only be available for the current pass and will be assumed to be both written and read so users don't need to add explicit read/write declarations.
        /// </summary>
        /// <param name="desc">Texture descriptor.</param>
        /// <returns>A new transient TextureHandle.</returns>
        public TextureHandle CreateTransientTexture(in TextureDesc desc);

        /// <summary>
        /// Create a new Render Graph Texture resource using the descriptor from another texture.
        /// This texture will only be available for the current pass and will be assumed to be both written and read so users don't need to add explicit read/write declarations.
        /// </summary>
        /// <param name="texture">Texture from which the descriptor should be used.</param>
        /// <returns>A new transient TextureHandle.</returns>
        public TextureHandle CreateTransientTexture(in TextureHandle texture);

        /// <summary>
        /// Create a new Render Graph Graphics Buffer resource.
        /// This Graphics Buffer will only be available for the current pass and will be assumed to be both written and read so users don't need to add explicit read/write declarations.
        /// </summary>
        /// <param name="desc">Compute Buffer descriptor.</param>
        /// <returns>A new transient BufferHandle.</returns>
        public BufferHandle CreateTransientBuffer(in BufferDesc desc);

        /// <summary>
        /// Create a new Render Graph Graphics Buffer resource using the descriptor from another Graphics Buffer.
        /// This Graphics Buffer will only be available for the current pass and will be assumed to be both written and read so users don't need to add explicit read/write declarations.
        /// </summary>
        /// <param name="computebuffer">Graphics Buffer from which the descriptor should be used.</param>
        /// <returns>A new transient BufferHandle.</returns>
        public BufferHandle CreateTransientBuffer(in BufferHandle computebuffer);

        /// <summary>
        /// This pass will read from this renderer list. RendererLists are always read-only in the graph so have no access flags.
        /// </summary>
        /// <param name="input">The Renderer List resource to use during the pass.</param>
        public void UseRendererList(in RendererListHandle input);

        /// <summary>
        /// Enable asynchronous compute for this pass.
        /// </summary>
        /// <param name="value">Set to true to enable asynchronous compute.</param>
        public void EnableAsyncCompute(bool value);

        /// <summary>
        /// Allow or not pass culling
        /// By default all passes can be culled out if the render graph detects it's not actually used.
        /// In some cases, a pass may not write or read any texture but rather do something with side effects (like setting a global texture parameter for example).
        /// This function can be used to tell the system that it should not cull this pass.
        /// </summary>
        /// <param name="value">True to allow pass culling.</param>
        public void AllowPassCulling(bool value);

        /// <summary>
        /// Allow commands in the command buffer to modify global state. This will introduce a render graph sync-point in the frame and cause all passes after this pass to never be
        /// reordered before this pass. This may nave negative impact on performance and memory use if not used carefully so it is recommended to only allow this in specific use cases.
        /// This will also set AllowPassCulling to false.
        /// </summary>
        /// <param name="value">True to allow global state modification.</param>
        public void AllowGlobalStateModification(bool value);
    }

    /// <summary>
    /// A builder for a compute render pass
    /// <see cref="RenderGraph.AddComputePass"/>
    /// </summary>
    public interface IComputeRenderGraphBuilder : IBaseRenderGraphBuilder
    {

        /// <summary>
        /// Specify the render function to use for this pass.
        /// A call to this is mandatory for the pass to be valid.
        /// </summary>
        /// <typeparam name="PassData">The Type of the class that provides data to the Render Pass.</typeparam>
        /// <param name="renderFunc">Render function for the pass.</param>
        public void SetRenderFunc<PassData>(BaseRenderFunc<PassData, ComputeGraphContext> renderFunc)
            where PassData : class, new();
    }

    /// <summary>
    /// A builder for a low-level render pass.
    /// <see cref="RenderGraph.AddLowLevelPass"/>
    /// </summary>
    public interface ILowLevelRenderGraphBuilder : IBaseRenderGraphBuilder
    {

        /// <summary>
        /// Specify the render function to use for this pass.
        /// A call to this is mandatory for the pass to be valid.
        /// </summary>
        /// <typeparam name="PassData">The Type of the class that provides data to the Render Pass.</typeparam>
        /// <param name="renderFunc">Render function for the pass.</param>
        public void SetRenderFunc<PassData>(BaseRenderFunc<PassData, LowLevelGraphContext> renderFunc)
            where PassData : class, new();
    }

    /// <summary>
    /// A builder for a raster render pass
    /// <see cref="RenderGraph.AddRasterRenderPass"/>
    /// </summary>
    public interface IRasterRenderGraphBuilder : IBaseRenderGraphBuilder
    {
        /// <summary>
        /// Use the texture as an rendertarget/renderpass attachment.
        /// Writing:
        /// Indicate this pass will write a texture on the current fragment position and sample index through MRT writes.
        /// The graph will automatically bind the texture as an MRT output on the indicated index slot.
        /// Write in shader as  float4 out : SV_Target{index} = value; This texture always needs to be written as an
        /// render target (SV_Targetx) writing using other methods (like `operator[] =` ) may not work even if
        /// using the current fragment+sampleIdx pos. When using operator[] please use the UseTexture function instead.
        /// Reading:
        /// Indicates this pass will read a texture on the current fragment position. If the texture is msaa then the sample index to read
        /// may be chosen by the shader. This informs the graph that any shaders in pass will only read from this
        /// texture at the current fragment position using the LOAD_FRAMEBUFFER_INPUT(idx)/LOAD_FRAMEBUFFER_INPUT_MS(idx,sampleIdx) macros.
        /// I.e this texture is bound as an render pass attachment on compatible hardware (or as a regular texture
        ///  as a fall back).
        /// The index passed to LOAD_FRAMEBUFFER_INPUT needs to match the index passed to ReadTextureFragment for this texture.
        /// </summary>
        /// <param name="tex">Texture to use during this pass.</param>
        /// <param name="index">Index the shader will use to access this texture.</param>
        /// <param name="flags">How this pass will acess the texture. Default value is set to AccessFlag.Write </param>
        /// <returns>A explicitly versioned handle representing the latest version of the pased in texture.
        /// Note that except for special cases where you want to refer to a specific version return value is generally discarded.</returns>
        TextureHandle UseTextureFragment(TextureHandle tex, int index, AccessFlags flags = AccessFlags.Write);

        /// <summary>
        /// Use the texture as a depth buffer for the Z-Buffer hardware.  Note you can only test-against and write-to a single depth texture in a pass.
        /// If you want to write depth to more than one texture you will need to register the second texture as WriteTextureFragment and manually calculate
        /// and write the depth value in the shader.
        /// Calling UseTextureFragmentDepth twice on the same builder is an error.
        /// Write:
        /// Indicate a texture will be written with the current fragment depth by the ROPs (but not for depth reading (i.e. z-test == always)).
        /// Read:
        /// Indicate a texture will be used as an input for the depth testing unit.
        /// </summary>
        /// <param name="tex">Texture to use during this pass.</param>
        /// <param name="flags">How this pass will acess the texture. Default value is set to AccessFlag.Write </param>
        /// <returns>A explicitly versioned handle representing the latest version of the pased in texture.
        /// Note that except for special cases where you want to refer to a specific version return value is generally discarded.</returns>
        TextureHandle UseTextureFragmentDepth(TextureHandle tex, AccessFlags flags = AccessFlags.Write);

        /// <summary>
        /// Specify the render function to use for this pass.
        /// A call to this is mandatory for the pass to be valid.
        /// </summary>
        /// <typeparam name="PassData">The Type of the class that provides data to the Render Pass.</typeparam>
        /// <param name="renderFunc">Render function for the pass.</param>
        public void SetRenderFunc<PassData>(BaseRenderFunc<PassData, RasterGraphContext> renderFunc)
            where PassData : class, new();
    }
}